Bencher BY-1 morse code / CW key

Description

Bencher BY-1 morse code / CW key
Serial number 633354
This is a used piece of equipment
.  Has some light signs of wear / scratches.
The cord will need to be replaced.  It was accidentally cut.  I have included the other part.
Ships via USPS Priority mail.
The paddle will be well packed for its voyage.
International sales welcomed and ship through the eBay Global Shipping Center.
Shipping times will vary if going out of the country. Specified delivery times listed on the ad is to US addresses and
will also vary
.  The eBay Global shipping center is included in that and not the final destination outside of the US.
The information listed below is from the manufacturers website and does not reflect what is included in the sale.  It is for reference use:
The underside of the BY-1 has 3 female and male disconnect terminals for ground and each of the DIT and DAH connections. HF transceivers equipped with either a 3.5mm (1/8") or 1/4" KEY input jack can be hooked right up with the EZ-1 kit. The EZ-1 has a 3 wire cable with the correct female terminals on one end for the BY-1 and BY-2, on the other end a 3.5mm connector with a 1/4" adapter included. No soldering. Plug the terminals onto the bottom of the key, plug the other end into the KEY jack on your HF rig.
Set spring tensioning, no adjustments to make other than desired contact spacing
Light touch for sending clean code
Powdercoated cold rolled steel base
Weight 3 lbs.
Adjustment wrench held on under the base with tool holder